Наличие: Уточняйте у менеджера
As the premier Cisco® modular multilayer switch, the Cisco Catalyst® 6500 Series delivers secure, converged services from the wiring closet to the core, to the data center, and to the WAN edge.
The Cisco Catalyst 6500 Series provides the broadest selection of 10/100 and 10/100/1000 Ethernet media, Power over Ethernet (PoE) (inline power) options, densities, performance, interoperability, and chassis deployment options. From basic wiring closets and small campus distribution and core layers to high-performance data centers, the Cisco Catalyst 6500 Series 10/100BASE-TX modules scale from 16 ports up to 1152 ports, and the 10/100/1000BASE-TX modules scale from 16 ports up to 576 ports in a single Cisco Catalyst 6500 Series chassis. Cisco Catalyst 6500 Series10/100 and 10/100/1000 modules are the key enablers of a Borderless Network access solution. Cisco with the Catalyst 6500 is the best choice for architecting and deploying holistic, cost-effective network access architecture. Securely connecting to anyone, anywhere, using any device. These modules are available in copper unshielded twisted-pair (UTP) and shielded twisted-pair (STP) using RJ-45 or RJ-21 making it the most widely deployed Cisco IP Telephony port enabled campus switch.
Note: Refer to the «Cisco Catalyst 6500 Series Mixed-Media Gigabit Ethernet Interface Modules» data sheet for information about modular physical layer deployment options using gigabit interface converters (GBICs) and Small Form-Factor Pluggable (SFP) form factors.
IP Telephony and User-Mobility Support with Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules
The Cisco Catalyst 6500 Series is a lead element in Cisco Borderless Network Access architecture, providing numerous IP telephony and network security features for the enterprise.
The Cisco Catalyst 6500 Series delivered the industry's first Ethernet switching modules that provided PoE for converged data and voice traffic as well as other powered devices, such as wireless access points. Several Cisco Catalyst 6500 Series interface modules support PoE on each interface port, allowing customers to build campus multiservice data and voice networks for wiring closets with the following features:
Cisco Catalyst Prestandard Inline Power, IEEE 802.3af PoE and IEEE 802.3at PoE+
Using existing Category 5 UTP installations, the PoE feature helps enable network administrators to control power distribution from a central location. Configuring Cisco Catalyst 6500 Series switches with uninterruptible-power-supply (UPS) systems helps ensure that building power outages will not affect network telephony connections, providing greater network availability.
Enabled by a daughter card for «pay-as-you-grow» flexibility, several Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet interface modules support PoE. Some of these interface modules support the IEEE 802.3af standard as an additional upgrade option. The Cisco Catalyst PoE feature implementation passes the required domestic and international safety regulations and compliance measures.
All Cisco Catalyst 6500 Series 802.3af PoE modules support three classes of powered devices, delivering a maximum of 15.4W per port as defined in the standard:
The new 48 x 10/100/1000 PoE/PoE+ module supports all three classes of powered devices in addition to Class 3 power as defined by the IEEE 802.3at PoE+ standard:
The maximum number of powered devices supported in a system for each class depends on the specific system configuration such as chassis type, supervisor engine, and power supply used. (Refer to Table 1.)
Table 1. Cisco Catalyst 6500 Series PoE Maximum Density
Power Supply |
10/100 Density |
10/100/1000 Density |
3000 W |
IEEE Class 2—253 IEEE Class 3—124 |
IEEE Class 2—228 IEEE Class 3—116 |
4000W |
IEEE Class 2—371 IEEE Class 3—180 |
IEEE Class 2—329 IEEE Class 3—169 |
6000W |
IEEE Class 2—576 IEEE Class 3—288 |
IEEE Class 2—523 IEEE Class 3—270 |
8700W |
IEEE Class 2—253 IEEE Class 3—124 |
IEEE Class 2—576 IEEE Class 3—407 |
Table 2. Cisco Catalyst 6500 Series PoE Products
Product Number |
Speed |
IEEE 802.3af PoE |
IEEE 802.3at PoE+ |
Cisco Prestandard PoE |
Max Power per Port |
WS-X6548-GE-45AF |
10/100/1000 |
Yes |
No |
Yes |
15.4W |
WS-X6548V-GE-TX |
10/100/1000 |
Field upgradeable with WS-F6K-GE48-AF= daughter card |
No |
Yes |
7W; 15.4W with WS‑F6K-GE48-AF= daughter card upgrade |
WS-X6148E-GE-45AT |
10/100/1000 |
Yes |
Yes |
Yes |
30W |
WS-X6148A-GE-45AF |
10/100/1000 |
Yes |
No |
Yes |
15.4W |
WS-X6148-GE-45AF |
10/100/1000 |
Yes |
No |
Yes |
15.4W |
WS-X6148V-GE-TX |
10/100/1000 |
Field upgradeable with WS-F6K-GE48-AF= daughter card |
No |
Yes |
7W; 15.4W with WS‑F6K-GE48-AF= daughter card upgrade |
WS-X6348-RJ45V |
10/100 |
No |
No |
Yes |
7W |
WS-X6348-RJ21V |
10/100 |
No |
No |
Yes |
7W |
WS-X6196-21AF |
10/100 |
Yes |
No |
Yes |
15.4W |
WS-X6148X2-45AF |
10/100 |
Yes |
No |
Yes |
15.4W |
WS-X6148A-45AF |
10/100 |
Yes |
No |
Yes |
15.4W |
WS-X6148-45AF |
10/100 |
Yes |
No |
Yes |
15.4W |
WS-X6148-RJ45V |
10/100 |
Yes (part number WS‑X6148-45AF-UG=) for upgrade |
No |
Yes |
7W |
WS-X6148-21AF |
10/100 |
Yes |
No |
Yes |
15.4W |
WS-X6148-RJ21V |
10/100 |
Yes; Use (part number WS-X6148-21AF-UG=) for upgrade |
No |
Yes |
7W |
Powered Device Discovery
The Powered Device Discovery feature eases network-management burdens by automating the PoE feature. With Powered Device Discovery, the Cisco Catalyst switch detects the presence of a powered device and supplies inline power automatically, eliminating the need to manually enable ports for inline power. The Powered Device Discovery mechanism is intelligent enough to differentiate between an IP phone and a NIC, and does not supply inline power to NICs or other devices not designed to use inline power. With this feature, network administrators can depend on automatic and centralized control of inline power that is safe to deploy and maintain.
In addition to the standard Powered Device Discovery feature, the Cisco Catalyst 6500 Series PoE module also provides intelligent power management such that it negotiates power requirements with Cisco powered devices using Cisco Discovery Protocol so that the switch supplies only the required amount of power instead of the maximum possible for a specific device class, thereby optimizing the overall power consumption in the system.
Auxiliary VLAN
The unique Auxiliary VLAN feature offered by Cisco Systems® provides automatic VLAN configuration for IP phones. It places phones into their own VLANs automatically, simplifying the task of overlaying a voice topology onto a data network. It allows network administrators to easily segment phones into separate, logical networks, even though the data and voice infrastructure is physically the same—greatly simplifying the tasks of managing a multiservice network and identifying and troubleshooting network problems.
The Auxiliary VLAN feature maintains VLAN assignments, even when phones are moved to new locations. When a user plugs a phone into the switch, the switch provides the phone with the necessary VLAN information.
AutoQoS
Network administrators can assign IP phones to separate IP subnets and VLANs to allow separate QoS or security policies for IP phones. The administrative task of configuring QoS to establish end-to-end traffic prioritization is greatly simplified by deploying AutoQoS, which configures QoS on voice ports automatically.
Cisco IBNS
Cisco IBNS builds on and enhances the capabilities of industry-standard IEEE 802.1X 10 by providing increased security and greater flexibility for enterprise wired or wireless network access. Policies are associated with users, not physical ports. This provides users with greater mobility and freedom, allowing security and service-level policies to travel with them throughout the enterprise. As a result, network scalability is increased while simplifying network management through centralized policy enforcement and dynamic provisioning. Centralized policy-based administration decreases the time, complexity, and effort associated with port security techniques at the MAC level. Cisco IBNS can help to quickly provision support for cross-functional or new project teams, enable secure access for trusted partners and vendors, and facilitate secure conference-room connectivity. For more information, refer to: http://www.cisco.com/en/US/partner/netsol/ns110/ns170/ns171/ns75/networking_solutions_package.html.
Enhanced Operational Control for Enhanced Manageability
The Cisco Catalyst 6500 Series offers advanced network-management features to make it easy to manage fast-growing networks. This includes TDR supported on the new 48-port 10- and 100-Mbps and all the 48-port 10-, 100-, and 1000-Mbps Ethernet modules (part numbers WS-X6148A-RJ-45, WS-X6148A-45AF, WS-X6148A-GE-TX, WS-X6148A-GE-45AF, WS-X6148-GE-TX, WS-X6548-GE-TX, and WS-X6748-GE-TX, respectively). TDR tests cabling by sending a signal down the cable, reporting cable breaks, cable crimps, and improperly wired cable.
Table 3. Classic, Cisco Express Forwarding 256, and Cisco Express Forwarding 720 10/100 and 10/100/1000 Interface Module Comparison
Feature |
Classic Interface Modules |
Cisco Express Forwarding 256 Interface Modules |
Cisco Express Forwarding 720 Interface Modules |
Performance or forwarding rate (Mpps) |
● 32 Gbps; 15 Mpps per system |
● 256 Gbps using Cisco Express Forwarding; up to 30 Mpps per system ● Using Distributed Cisco Express Forwarding upgrade: Up to 15 Mpps per slot for slots equipped with distributed forwarding card (DFC) or DFC3 to support distributed forwarding |
● 720 Gbps using Cisco Express Forwarding; up to 30 Mpps per system ● Using Distributed Cisco Express Forwarding upgrade, up to 48 Mpps sustained per slot for modules equipped with DFC3 to support distributed forwarding |
Forwarding-engine architecture |
● Centralized Cisco Express Forwarding engine located on supervisor policy feature card (PFC) makes forwarding decision |
● Centralized Cisco Express Forwarding engine located on supervisor PFC makes forwarding decision ● Upgradable to Distributed Cisco Express Forwarding switching1 with optional WS-F6K-DFC or WS-F6K-DFC3) |
● Centralized Cisco Express Forwarding engine located on supervisor PFC makes forwarding decision ● Upgradable to Distributed Cisco Express Forwarding local switching with optional WS-F6700-DFC3) |
Supervisor engine supported |
● Supervisor Engine 1A ● Supervisor Engine 2 ● Supervisor Engine 720 ● Supervisor Engine 32 |
● Supervisor Engine 1A ● Supervisor Engine 2 ● Supervisor Engine 720 ● Supervisor Engine 32 |
● Supervisor Engine 720 |
Optional DFC upgrade support |
● Not supported |
● Use WS-F6K-DFC) with Supervisor Engine 2 and switch fabric module 2 (SFM2) ● Use WS-F6K-DFC3) with Supervisor Engine 720 |
● Use WS-F6700-DFC3 with Supervisor Engine 720 |
Fabric connections |
● Connection to 32-Gbps shared bus (all supervisors) |
● Connections through single 8-Gbps channel to switch fabric (Supervisor Engine 720 or Supervisor Engine 2 with SFM and 32-Gbps shared bus |
● Dual 20-Gbps (40 Gbps total) channel connection to switch fabric on Supervisor Engine 720 |
Chassis or slot support requirements |
● Any slot in any chassis |
● Any slot in any chassis |
● Any slot in Cisco Catalyst 6506, Catalyst 6509, Catalyst 6509-NEB-A, and slots 9 through 13 on Cisco Catalyst 6513; Cisco Catalyst 6503 not supported at current time ● Any slot in Cisco Catalyst 6500 E‑Series. |
1 The WS-X6548-GE-TX, WS-X6548V-GE-TX, and WS-X6548-GE-45AF modules do not support distributed forwarding; a WS-F6K-DFC and WS-F6K-DFC3A/B/BXL) cannot be installed on these interface modules.
All Ethernet modules support extensive interface-level statistics, including four RMON groups: alarms, events, history, and statistics. Additional RMON groups (all nine groups) can be monitored using the integrated Cisco Catalyst 6500 Series Network analysis Module (NAM) or switch probes.
For in-depth network analysis, the Switched Port Analyzer (SPAN) feature helps network managers redirect traffic from each switched port to a specific VLAN, allowing them to add, move, and easily change group access to network resources from centralized locations using CiscoWorks network-management software.
Support for local, out-of-band management is delivered through a terminal or modem attached to the console or auxiliary interface of the supervisor engine. Remote in-band management is available with SNMP Versions 1, 2, and 3.
Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Modules
Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet interface modules feature three classes of forwarding architectures and switch-fabric interconnections—classic, Cisco Express Forwarding 256, and Cisco Express Forwarding 720—to provide a choice of speeds and forwarding rates. Table 3 highlights the primary differences in the three classes of forwarding and switch-fabric architectures
Cisco Catalyst 6500 Series Cisco Express Forwarding 720 10-, 100-, and 1000-Mbps Ethernet-over-Copper Modules
Designed for high-performance enterprise and service provider distribution, core layers, data-center, and Web-hosting applications where voice capability is not required, Cisco Express Forwarding 720 twisted-pair interface modules provide line-rate 10/100/1000 Ethernet forwarding with the following operational advantages (refer to Table 4):
Note: PoE is not supported on Cisco Express Forwarding 720 10/100/1000 interface modules.
Table 4. Cisco Express Forwarding 720 Copper 10/100/1000 Ethernet Interface Module
Product Number |
Primary Application |
Ports, Connector, Maximum Distance, and Cable Type |
PoE Support |
Maximum Frame Size (jumbo frame) Support |
Queues per Port (Tx = Transmit, Rx = Receive)1 |
Buffer Size per Port |
WS-X6748-GE-TX |
Data center and server farm |
48, RJ-45, 100m, Category 5 cable |
No |
Up to 9216 bytes per frame |
Tx-1p3q8t; Rx-1q8t (when using Distributed Cisco Express Forwarding) |
1.3 MB |
1 Queues Legend: 1p3q1t = 1 priority queue, 3 round robin queues, 1 threshold
Figure 1. Cisco Express Forwarding 720 10/100/1000 Interface Module (part number WS-X6748-GE-TX) with Distributed Cisco Express Forwarding Daughter Card (part number WS-F6700-DFC3)
Cisco Catalyst 6500 Series Cisco Express Forwarding 256 10/100 and 10/100/1000 Interface Modules
Designed for premier wiring closets, small campus backbone, and server farm applications, Cisco Express Forwarding 256 10/100 and 10/100/1000 Ethernet-over-copper interface modules provide line-rate 10/100 Ethernet forwarding and gigabit bandwidth options. (Refer to Table 4).
The PoE Cisco Express Forwarding 256 10/100/1000 interface modules provide flexible 10-, 100-, and 1000-Mbps access to the desktop through standard RJ-45 connectors. These interface modules feature PoE field-installable daughter cards for pay-as-you-grow investment protection and flexibility. Purposefully designed for the wiring closet with 8:1 oversubscription, these 10/100/1000 interface modules cannot be equipped with distributed forwarding cards.
Offered with a choice of RJ-45 and RJ-21 connectors, the data-only Cisco Express Forwarding 256 10/100 and 16-port 10/100/1000 Ethernet interface modules can be deployed where PoE capability is not required, and they can be equipped with distributed forwarding daughter cards for higher-performance local packet-forwarding environments.
The Cisco Catalyst 6500 Series Cisco Express Forwarding 256 10/100 and 10/100/1000 interface modules offer the following operational advantages and characteristics:
Exclusive features of the Cisco Express Forwarding 256 10/100 and 16-port Cisco Express Forwarding 256 10/100/1000 Ethernet interface modules follow:
Exclusive characteristics and features of the 48-port Cisco Express Forwarding 256 10/100/1000 Ethernet interface module follow:
Table 5 shows application, port, and queue data for the Cisco Express Forwarding 256 10/100 and 10/100/1000 modules.
Table 5. Cisco Express Forwarding 256 10/100 and 10/100/1000 Modules
Product Number |
Primary Application |
Ports, Connector, Maximum Distance, and Cable Type |
PoE Support |
Maximum Frame Size (jumbo frame) Support |
Queues per Port (Tx = Transmit, Rx = Receive)1 |
Buffer Size per Port |
WS-X6548-GE-TX |
Premier wiring closet |
48, RJ-45, 100m, Category 5 cable |
Field upgradable to Cisco Prestandard and IEEE 802.3af |
Up to 1518 bytes per frame |
Tx-1p2q2t (per 8 ports) Rx-1p2t (per port) |
1 MB per 8 ports |
WS-X6548-GE-45AF |
Premier wiring closet |
48, RJ-45, 100m, Category 5 cable |
Yes (both IEEE 802.3af and Cisco Prestandard) |
Up to 1518 bytes per frame |
Tx-1p2q2t (per 8 ports) Rx-1p2t (per port) |
1 MB per 8 ports |
WS-X6548V-GE-TX |
Premier wiring closet |
48, RJ-45, 100m, Category 5 cable |
Yes, only Cisco Pre-standard |
Up to 1518 bytes per frame |
Tx-1p2q2t (per 8 ports) Rx-1p2t (per port) |
1 MB per 8 ports |
WS-X6516-GE-TX |
Data center and server farm |
16, RJ-45, 100m, Category 5 cable |
No |
Up to 9216 bytes per frame |
Tx-1p2q2t Rx-1p1q4t |
512 KB |
WS-X6548-RJ-45 |
Server Farmfarm |
48, RJ-45, 100m, Category 5 cable |
No |
Up to 1518 bytes per frame |
Tx-1p3q1t Rx-1p1q |
1.2 MB |
WS-X6548-RJ-21 |
Server farm |
48, RJ-21, 100m, Category 5 cable |
No |
Up to 1518 bytes per frame |
Tx-1p3q1t Rx-1p1q |
1.2 MB |
1 Queues legend: 1p3q1t = 1 priority queue, 3 round-robin queues, and 1 threshold
Figure 2. Cisco Express Forwarding 256 10100/1000 Interface Module (part number WS-X6548-GE-TX)
Figure 3. Cisco Express Forwarding 256 Copper 10/100 Interface Module (part number WS-X6548-RJ-45)
Figure 4. Cisco Express Forwarding 256 Copper 10/100 Interface Module (part number WS-X6548-RJ-21)
Cisco Catalyst 6500 Series PoE, Classic 10/100, and 10/100/1000 Interface Modules
Designed for deployment in wiring closets, high-density Cisco Catalyst 6500 Series Classic 10/100 and 10/100/1000 interface modules provide line-rate 10/100 Ethernet forwarding and gigabit bandwidth to the desktop capabilities. These interface modules feature PoE field-installable daughter cards for pay-as-you-grow investment protection and flexibility.
The 96-port 10/100 module (part number WS-X6196-21AF) is the industry's first 96-port 10/100 RJ-21 module with IEEE 802.3af support for all 96 ports, helping enable the Cisco Catalyst 6500 Series to deliver the industry's highest port densities ranging from 192 10/100 ports in a Cisco Catalyst 6503 chassis to 1152 10/100 ports in a Cisco Catalyst 6513 chassis for a very cost-effective solution in the wiring closet.
The WS-X6196-RJ-21 module doubles the port density in the system in the same footprint, using the stacked standard RJ-21 connectors. Port-density improvement can be achieved with no incremental investment in the cable infrastructure. With the 802.3af PoE daughter card, this module can support up to 96 Class 2 devices or 62 Class 3 devices per module (960W of PoE per module).
The 96-port 10/100 module (part number WS-X6148X2-RJ-45) is the industry's first 96-port 10/100 RJ-45 module that helps enable the Cisco Catalyst 6500 Series to deliver industry's highest port densities, ranging from 192 10/100 ports in a Cisco Catalyst 6503 chassis to 1152 10/100 ports in a Cisco Catalyst 6513 chassis for a very cost-effective solution in the wiring closet.
The 96-port 10/100 module (part number WS-X6148X2-RJ-45) doubles the port density in the system by allowing it to expand from 48 ports to 96 ports per slot with the addition of a splitter (included), typically mounted at the patch panel. The splitting also can occur at the wall jack, providing another option for doubling the port density of the switch without costly rewiring. This module also can function as a regular 48-port 10/100 module for maximum flexibility and scalability in the future. With the 802.3af PoE daughter card, this module can support up to 48 Class 3 devices per module when operating as a 48-port module, or up to 96 Class 2 devices per module when operating as a 96-port module (960W of PoE per module).
Using RJ-21 or RJ-45 connectors, the Cisco Catalyst 6500 Series classic 10/100 and 10/100/1000 modules are ready to be deployed in virtually all wiring-closet environments (Table 5) with the following operational advantages and characteristics:
Note: Some of these modules are designed to support field upgrades to the IEEE 802.3af PoE standard with a new daughter card, providing maximum investment protection. Table 8 for details.
Table 6. Classic 10/100 and 10/100/1000 Modules
Product ID |
Primary Application |
Ports, Connector, Maximum Distance, and Cable Type |
PoE |
PoE+ |
Maximum Frame Size jumbo frame Support |
Queues per Port (Tx = Transmit, |
Buffer Size/Port |
WS-X6148E-GE-45AT |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Yes |
Yes |
Up to 9216 bytes per frame |
Tx-1p3q8t Rx-1q2t |
5.3 MB |
WS-X6148A-GE-TX |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Field-upgradable to Cisco Prestandard and IEEE 802.3af |
No |
Up to 9216 bytes per frame |
Tx-1p3q8t Rx-1q2t |
2.67 MB |
WS-6148-GE-TX |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Field-upgradable to Cisco Pre standard and IEEE 802.3af |
No |
Up to 1518 bytes per frame |
Tx-1p2q2t (per 8 ports) Rx‑1p2t (per port) |
1 MB per 8 ports |
WS-X6148A-GE-45AF |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Yes (both IEEE 802.3af and Cisco Prestandard) |
No |
Up to 9216 bytes per frame |
Tx-1p3q8t Rx-1q2t |
2.67 MB |
WS-X6148-GE-45AF |
Wiring Closet |
48, RJ-45,100m, Category 5 cable |
Yes (Both both IEEE 802.3af and Cisco Prestandard) |
No |
Up to 1518 bytes per frame |
Tx-1p2q2t (per 8 ports) Rx‑1p2t (per port) |
1 MB per 8 ports |
WS-X6148V-GE-TX |
Wiring Closet |
48, RJ-45,100m, Category 5 cable |
Yes, only Cisco Prestandard |
No |
Up to 1518 bytes per frame |
Tx-1p2q2t (per 8 ports) Rx‑1p2t (per port) |
1 MB per 8 ports |
WS-X6348-RJ45 |
Wiring Closet |
48, RJ-45,100m, Category 5 cable |
Field -upgradable to only Cisco Prestandard and not IEEE 802.3af |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6348-RJ45V |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Yes, only Cisco Prestandard |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6348-RJ21V |
Wiring closet |
48, RJ-21,100m, Category 5 cable |
Yes, only Cisco Prestandard |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6196-RJ-21 |
Wiring closet |
96, RJ-21,100m, Category 5 cable |
Field -upgradable to Cisco Prestandard and IEEE 802.3af |
No |
Up to 9216 bytes per frame |
Tx-1p3q1t Rx-1p1q0t |
1.2 MB |
WS-X6196-21AF |
Wiring closet |
96, RJ-21,100m, Category 5 cable |
Yes (both IEEE 802.3af and Cisco Prestandard) |
No |
Up to 9216 bytes per frame |
Tx-1p3q1t Rx-1p1q0t |
1.2 MB |
Product ID |
Primary Application |
Ports, Connector, Maximum Distance, |
PoE |
PoE+ |
Maximum Frame Size jumbo frame Support |
Queues per Port (Tx = Transmit, Rx = Receive1 |
Buffer Size/Port |
WS-X6148X2-RJ-45 |
Wiring closet |
48, scalable to 96, RJ-45,100m, Category 5 cable |
Field -upgradable to Cisco Prestandard and IEEE 802.3af |
No |
Up to 9216 bytes per frame |
Tx-2q2t Rx-1q4t |
1.2 MB |
WS-X6148X2-45AF |
Wiring closet |
48, scalable to 96, RJ-45,100m, Category 5 cable |
Yes (both IEEE 802.3af and Cisco Prestandard) |
No |
Up to 9216 bytes per frame |
Tx-2q2t Rx-1q4t |
1.2 MB |
WS-X6148A-RJ-45 |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Field -upgradable to IEEE 802.3af |
No |
Up to 9216 bytes per frame |
Tx-1p3q8t Rx-1p1q4t |
1.2 MB |
WS-X6148A-45AF |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Yes (both IEEE 802.3af and Cisco Prestandard) |
No |
Up to 9216 bytes per frame |
Tx-1p3q8t Rx-1p1q4t |
1.2 MB |
WS-X6148-RJ45 |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Field -upgradable to only Cisco Prestandard and Advance Replacement for IEEE 802.3af |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6148-45AF |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Yes (both IEEE 802.3af and Cisco Prestandard) |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6148-RJ45V |
Wiring closet |
48, RJ-45,100m, Category 5 cable |
Yes, only Cisco Prestandard |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6148-RJ21 |
Wiring closet |
48, RJ-21,100m, Category 5 cable |
Field -upgradable to only Cisco Prestandard and Advance Replacement for IEEE 802.3af |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6148-21AF |
Wiring closet |
48, RJ-21,100m, Category 5 cable |
Yes (both IEEE 802.3af and Cisco Prestandard) |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
WS-X6148-RJ21V |
Wiring closet |
48, RJ-21,100m, Category 5 cable |
Yes, only Cisco Prestandard |
No |
Up to 8092 bytes per frame |
Tx-2q2t Rx-1q4t |
128 KB |
1 Queues legend: 1p3q1t = 1 priority queue, 3 round-robin queues, and 1 threshold
Figure 5. Cisco Classic 48-Port 10/100/1000 Module (part number WS-X6148E-GE-45AT) with 802.3af PoE and 802.3at PoE+
Figure 6. Cisco Classic 48-Port 10/100/1000 Module (part number WS-X6148A-GE-TX) with 802.3af PoE Daughter (floating above) (part number WS-F6K-GE48-AF)
Figure 7. Cisco Classic 96-Port 10/100 802.3af PoE Module (part number WS-X6148X2-45AF)
Figure 8. Cisco Classic 48-Port 10/100 802.3af PoE Module (part number WS-X6148A-45AF)
Figure 9. Cisco Classic 48-Port 10/100 802.3af PoE Module, RJ-21 (part number WS-X6148-21AF)
Figure 10. Cisco Classic 96-Port 10/100 (with field upgrade option to 802.3af PoE module) (part number WS-X6196-RJ-21)
Cisco Catalyst 6500 Series Data-Only Classic Gigabit Ethernet-over-Copper Interface Module
Designed for distribution and core layers and for data-center and Web-hosting applications, the Cisco Catalyst 6500 Series Classic 16-port Gigabit Ethernet interface modules provide line-rate Gigabit Ethernet forwarding with the following operational advantages:
Ordering Information
Table 7 provides part-number information for Cisco Catalyst 6500 Series 10/100 and 100/1000 Ethernet interface modules.
Table 7. Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules
Product Number |
Description |
10/100/1000 |
|
WS-X6748-GE-TX |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 720 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6700-DFC3A=) |
WS-X6548-GE-TX |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module; field-upgradable to support Cisco Prestandard PoE daughter card (part number WS-F6K-VPWR-GE=) or 802.3af PoE daughter card (part number WS-F6K-GE48-AF=) |
WS-X6548-GE-45AF |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module with 802.3af PoE daughter card (that is, includes daughter card [part number WS-F6K-GE48-AF=]) |
WS-X6548V-GE-TX |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR-GE=]) |
WS-X6516-GE-TX |
Cisco Catalyst 6500 Series 16-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6K-DFC= or DFC3) |
WS-X6148E-GE-45AT |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module with IEEE 802.3af PoE and IEEE 802.3at PoE+ support |
WS-X6148A-GE-TX |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-GE48-AF=) |
WS-X6148-GE-TX |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module; field-upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR-GE=) or 802.3af PoE daughter card (part number WS-F6K-GE48-AF=) |
WS-X6148A-GE-45AF |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card (part number WS-F6K-GE48-AF=) |
WS-X6148-GE-45AF |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card (part number WS-F6K-GE48-AF=) |
WS-X6148V-GE-TX |
Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card (part number WS-F6K-VPWR-GE=) |
10/100 |
|
WS-X6548-RJ-45 |
Cisco Catalyst 6500 Series 48-Port Cisco Express Forwarding 256 10/100 RJ-45 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6K-DFC= or DFC3) |
WS-X6548-RJ-21 |
Cisco Catalyst 6500 Series 48-Port, Cisco Express Forwarding 256 10/100 RJ-21 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6K-DFC= or DFC3) |
WS-X6348-RJ45 |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module; field-upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR=) |
WS-X6348-RJ45V |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=]) |
WS-X6348-RJ21V |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=]) |
WS-X6148X2-RJ-45 |
Cisco Catalyst 6500 Series 96-Port 10/100 RJ-45 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-FE48X2-AF=) |
WS-X6148X2-45AF |
Cisco Catalyst 6500 Series 96-Port 10/100 RJ-45 Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card [part number WS-F6K-FE48X2-AF=]) |
WS-X6196-RJ-21 |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-FE48X2-AF=) |
WS-X6196-21AF |
Cisco Catalyst 6500 Series 96-Port 10/100 RJ-21Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card [part number WS-F6K-FE48X2-AF=]) |
WS-X6148A-RJ-45 |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-GE48-AF=) |
WS-X6148-RJ-45 |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module; upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR=) or to IEEE 802.3af PoE daughter card (part number WS-X6148-45AF-UG=) |
WS-X6148A-45AF |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with IEEE 802.3af PoE daughter card |
WS-X6148-45AF |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with IEEE 802.3af PoE daughter card |
WS-X6148-RJ45V |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=]) |
WS-X6148-RJ-21 |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module; upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR=) or to IEEE 802.3af PoE daughter card (part number WS-X6148-21AF-UG=) |
WS-X6148-21AF |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module with IEEE 802.3af PoE daughter card |
WS-X6148-RJ21V |
Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=]) |
Table 8. Cisco Catalyst 6500 Series Power Over Ethernet Daughter Cards
Part Number |
Description |
WS-F6K-GE48-AF= |
Cisco Catalyst 6500 Series 802.3af PoE Daughter Card for 10/100/1000 modules (part numbers WS-X6148-GE-TX, WS-X6148V-GE-TX, WS-X6548-GE-TX, and WS-X6548V-GE-TX) |
WS-F6K-FE48X2-AF= |
Cisco Catalyst 6500 Series 802.3af PoE Daughter Card for WS-X6148X2-RJ-45) module |
WS-X6148-45AF-UG= |
Cisco Catalyst 6500 Series 802.3af PoE Advanced Upgrade for [PRODUCT NAME] (part number WS-X6148-RJ45 or WS-X6148-RJ45V) |
WS-X6148-21AF-UG= |
Cisco Catalyst 6500 Series 802.3af PoE Advanced Upgrade for [PRODUCT NAME] (part number WS-X6148-RJ21 or WS-X6148-RJ21V) |
WS-F6K-VPWR= |
Cisco Catalyst 6500 Series Cisco Prestandard PoE Daughter Card for 10/100 modules (for WS-X6148-RJxx and WS-X6348-xx) |
WS-F6K-VPWR-GE= |
Cisco Catalyst 6500 Series Cisco Prestandard PoE Daughter Card for 10/100/1000 modules (part numbers WS-X6148-GE-TX and WS-X6548-GE-TX) |
Ordering Information—DFC Daughter Cards
Table 9 provides part-number information for distributed forwarding daughter cards for the Cisco Catalyst 6500 Series Cisco Express Forwarding 256 and Cisco Express Forwarding 720 Ethernet interface modules.
Table 9. Cisco Catalyst 6500 Series 10/100 and 100/1000 Distributed Forwarding Cards
Part Number |
Description |
WS-F6K-DFC |
Cisco Catalyst 6500 Series DFC3A for Cisco Catalyst 6500 Series; Cisco Catalyst 6816 modules used with Supervisor Engine 2 |
WS-F6K-DFC3A |
Cisco Catalyst 6500 Series DFC3A for Cisco Catalyst 6500; Cisco Catalyst 6816 modules used with Supervisor Engine 720 |
MEM-DFC-256MB |
256-MB DRAM option for DFC |
MEM-DFC-512MB |
512-MB DRAM option for DFC |
WS-F6700-DFC3A |
Cisco Catalyst 6500 Series DFC3A for Cisco Catalyst 6700 Series modules |
WS-F6700-DFC3B |
Cisco Catalyst 6500 Series DFC3B for Cisco Catalyst 6700 Series modules |
WS-F6700-DFC3BXL |
Cisco Catalyst 6500 Series DFC3BXL for Cisco Catalyst 6700 Series modules |
Specifications
Standard Network Protocols
Physical Specification
Environmental Conditions
Safety Compliance
EMC Compliance
Network Management
Inline-Power Specifications
Maximum Station-to-Station Cabling Distance
Indicators and Interfaces
Cisco Technical Support Services
Whether your company is a large organization, a commercial business, or a service provider, Cisco is committed to maximizing the return on your network investment. Cisco offers a portfolio of technical support services to help ensure that your Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software.
The Cisco Technical Support Services organization offers the following features, providing network investment protection and minimal downtime for systems running mission-critical applications:
Cisco Technical Support Services include:
For more information, visit:
http://www.cisco.com/en/US/products/svcs/ps3034/serv_category_home.html
Additional Cisco Catalyst 6500 Series Information
Visit the following link to view the following data sheets: http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheets_list.html
Cisco Catalyst 6500 Software
Supervisors and Switch Fabric Modules
Modules
Layer 4–7 Modules
FlexWAN, Optical Services Modules, and ATM
GBIC, SFP, and XENPAK Optics